+- SA Classic Mini Forum (https://samini.co.za)
+-- Forum: General Stuff (https://samini.co.za/forumdisplay.php?fid=5)
+--- Forum: General Chit Chat (https://samini.co.za/forumdisplay.php?fid=6)
+--- Thread: Fitting Arches? (/showthread.php?tid=812)
Fitting Arches? - Kieron123 - 02-24-2018
Hi Guys, can anyone recommend a panelbeater who has undertaken the Sportspack arch fit? Don't fancy the learning curve! Fitting rear means cutting double skin bodywork, front single skin
RE: Fitting Arches? - jimmyjamjar - 02-24-2018
You don't need to cut the rear only the front arch by about 25mm. You will need to either bend a lip on the cut area or tig a stiffner piece or as I did to pop rivet the lip piece back into the arch to give good rigidity.
RE: Fitting Arches? - Jared Mk3 - 02-25-2018
There are templates available online for cutting the front arches.
RE: Fitting Arches? - jimmyjamjar - 02-26-2018
Yes the templates from mini spares work well as tey give the hole centres for the fitting bolts. Remember if you intend spraying the arches to u8se the correct prepand spray paint as the plastic is different to metal. Also those supplied beading strips that came with the arches are rubbish, get some decent ones from Rubber Products and moulding or sinilar place locally, I would also use nylock nuts to fix the arches on.
RE: Fitting Arches? - Jared Mk3 - 02-26-2018
(02-26-2018, 08:47 AM)jimmyjamjar Wrote: Yes the templates from mini spares work well as tey give the hole centres for the fitting bolts. Remember if you intend spraying the arches to u8se the correct prepand spray paint as the plastic is different to metal. Also those supplied beading strips that came with the arches are rubbish, get some decent ones from Rubber Products and moulding or sinilar place locally, I would also use nylock nuts to fix the arches on.
Some solid advice in here
RE: Fitting Arches? - Kieron123 - 03-02-2018
Thanks people, as mentioned not done previously, my thoughts were based on this URL http://www.minispares.com/article/Technical~Information/General~Tech/Sportspack~Fitting~Template.aspx?ids=6%7C10%7C1273&perma=sportspack-fitting-template
they show templates front and rear and i assumes cutting, not just hole positions
I await car, and will take pics for posting, cheers K
http://www.minispares.com/article/Technical~Information/General~Tech/Sportspack~Fitting~Template.aspx?ids=6%7C10%7C1273&perma=sportspack-fitting-template