06-14-2018, 08:18 AM
Hi Guys
Update time.
I did the idler gear end float got it down to 5 thou.
Fitted the gearbox with oversize washers.
This whole lot is new just to ensure I run into hopefully no problems.
Fitting clutch oil seal with the correct tool.
Like I said I fit these extra oil seal protector shield to ensure that if the oil seal leaks I still have a functioning clutch.
Cleaned up the crank thread on both ends.
Ready go be torqued on and finally fit the diaphragm.....
Update time.
I did the idler gear end float got it down to 5 thou.
Fitted the gearbox with oversize washers.
This whole lot is new just to ensure I run into hopefully no problems.
Fitting clutch oil seal with the correct tool.
Like I said I fit these extra oil seal protector shield to ensure that if the oil seal leaks I still have a functioning clutch.
Cleaned up the crank thread on both ends.
Ready go be torqued on and finally fit the diaphragm.....
Own some minis, break them, fix them, improve them, test them to the limit....
![[-]](https://samini.co.za/images/collapse.png)